Our Pro Series V pumps are designed for high volume, low head (under 300ft) applications. They can be self-installed or using a local installer. More than 300ft head? Pro Series D – Deep Solar Wells

ProV 1080

ProV 1600

ProV 2100

ProV 3200

Gallons Per Day Estimate
(6 hours)**
Gallons Per Day Estimate
(6 hours)**
Gallons Per Day Estimate
(6 hours)**
Gallons Per Day Estimate
(6 hours)**
100ft 10,080 (Peak 28 GPM) 11,520 (Peak 32 GPM) Use ProV 1600 Use ProV 1600
200ft 7,200 (Peak 20 GPM) 9,360 (Peak 26 GPM) 9,720 (Peak 27 GPM) 11,160 (Peak 31 GPM)
300ft 5,400 (Peak 15 GPM) 4,320 (Peak 12 GPM) 7,200 (Peak 20 GPM) 9,360 (Peak 26 GPM)
Included High Volume Centrifugal Pump, 3.9″D Brushless Motor, Pre-programmed Controller, Float Sensor for Tank or Pond, Solar Panel
Connector Cables (Up to 50ft), Install Manual, Solar Panels,
1 1/4″ Barb for 1 1/4″ Poly Pipe
 High Volume Centrifugal Pump, 3.9″D Brushless Motor, Pre-programmed Controller, Float Sensor for Tank or Pond, Solar Panel
Connector Cables (Up to 50ft), Install Manual, Solar Panels,
1 1/4″ Barb for 1 1/4″ Poly Pipe
 High Volume Centrifugal Pump, 3.9″D Brushless Motor, Pre-programmed Controller, Float Sensor for Tank or Pond, Solar Panel
Connector Cables (Up to 50ft), Install Manual, Solar Panels,
1 1/4″ Barb for 1 1/4″ Poly Pipe
 High Volume Centrifugal Pump, 3.9″D Brushless Motor, Pre-programmed Controller, Float Sensor for Tank or Pond, Solar Panel
Connector Cables (Up to 50ft), Install Manual, Solar Panels,
1 1/4″ Barb for 1 1/4″ Poly Pipe
Motor Rating
(watts)
500-750w 1000w 1500w 2200w
Solar Array
Easy Mounting Plans
1080 watts 1600 watts 2000-2160 watts 3000-3240 watts
Backup Options Generator Backup Generator Generator Generator
List Price $4,939 $5,819
$8,199
$8,719
Sale Price
$3,999
Free Shipping (Comes on Pallet)
Buy Now
$4,499
Free Shipping 
(Comes on Pallet)
Buy Now
$5,499
Free Shipping 
(Comes on Pallet)
Buy Now
$6,999
Free Shipping 
(Comes on Pallet)
Buy Now

**Gallons per day and GPM estimates will vary by geographic area, sunlight, season, mounting angle, plumbing diameter, pipe length and connectors. The estimates we provide are based on the pump/motor curves from the pumps manufacturers. We can’t guarantee actual values, but in our experience with hundreds of systems, these are reasonable estimates to base your decision on. To be conservative our engineers tend to recommend sizing up if there is doubt.

Have a local pump installer you’d like to work with? Have them contact Chris directly and we can work with them to make sure we have all parts of the install covered for you. chris@ruralpowersystems.com


 

Our Pro Series systems use hearty USA 3 Phase Motors and 4″ Pump Ends. Our controllers are the best in the world.

While the systems shown above are our most popular sizes, we regularly help design systems with pumps up to 6″ and 10 HP for larger projects. Or have an existing Single Phase Pump you’d like to use? Email chris@ruralpowersystems.com